Morris C2 Contour Скачать руководство пользователя

Страница: 6 / 92

Safety

1-2

August 2014

C2 Contour Air Drill

Watch for this symbol. It identifies potential hazards

to health or personal safety. It means:

ATTENTION - BE ALERT.

Your Safety is involved.

Familiarize yourself with the location of all decals. Read them
carefully to understand the safe operation of your machine.

SAFETY-ALERT

SYMBOL

Three words are used in conjunction with the safety-alert symbol:

Signal Words

The words

DANGER, WARNING

CAUTION

are used

with the safety alert symbol. Learn to recognize the
safety alerts, and follow the recommended precautions
and safe practices.

Replace any

DANGER, WARNING, CAUTION

instructional decal that is not readable or is missing. The
location and part number of these decals is identified
later in this section of the manual.

The words

Important

and

Note

are not related

to personal safety but are used to give additional
information and tips for operating or servicing this
equipment.

IMPORTANT:

Identifies special instructions or

procedures which, if not strictly
observed could result in damage to, or
destruction of the machine, process or
its surroundings.

NOTE:

Indicates points of particular interest for more

efficient and convenient repair or operation.

Indicates an imminently hazardous situation that, if not
avoided, will result in DEATH OR SERIOUS INJURY.

DANGER

Indicates a potentially hazardous situation that, if not
avoided, could result in DEATH OR SERIOUS INJURY.

WARNING

Indicates a potentially hazardous situation that, if not
avoided, may result in MINOR OR MODERATE INJURY.

CAUTION

Содержание C2 Contour





























































































Результаты поиска

Содержание C2 Contour

Отзывы:

Похожие инструкции для C2 Contour

Бренды по названию

Популярные бренды

Morris C2 Contour, Руководство оператора

Результаты поиска

Содержание C2 Contour

Отзывы:

Похожие инструкции для C2 Contour

Бренды по названию

Популярные бренды