7
7
Turn the temperature dial
(5)
to suit the garment
(see ‘Temperature guide’, page 5). The
temperature indicator light
(11)
illuminates until
the temperature is reached. Begin ironing when
the temperature indicator light goes out. If you
turn the temperature dial down, wait until the
temperature indicator light illuminates and then
goes off again.
The temperature indicator will cycle on and off
during ironing as it maintains its temperature.
6
4
4
6
Press the steam level selector button
(35)
to
select the desired steam level. The relevant
steam level indicator
(32/33/34)
will stop
flashing and illuminate constantly when the
steam level is reached.
For a strong, continuous flow of steam during
ironing, press and hold the iron steam trigger
(4)
to deliver steam through the soleplate
(6)
.
NOTE: During use, the number displayed on the
steam pressure indicator
(27)
will change. This
will not interfere with how you use the product
or how it performs.
WARNING: The steam supply cord
(8)
will get
hot during use.
Plug the appliance into a mains outlet and press
the On/Off power button
(31)
to activate the unit.
A buzzer will be heard, the power indicator
(28)
will illuminate and the low steam indicator
(34)
will flash.
4
Remove the detachable water tank
(1)
by
squeezing the water tank release button
(19)
. Lift
the filler cap
(2)
, and fill with water to the max fill
line. Replace the water tank.
3
5
Using the Steam Generator for steam ironing (continued)
When you have finished ironing, turn off the
appliance by pressing and holding the On/Off power
button
(31)
for two seconds. A buzzer will be heard
and both the power indicator
(28)
and steam level
indicator
(32/33/34)
will be extinguished.
Disconnect the plug from the mains outlet.
7
RN330009MUK Rev2_Instruction Book 11/12/2013 14:57 Page 7
