10
Steam cleaning floors (certain models only)
2
Ensure the jet nozzle child lock
(36)
is in the
locked position.
Then, attach the jet nozzle steam supply cord
(42)
into the steam cord connection inlet
(23)
on
the back of the steam generator main body
(16)
.
The steam cord connection inlet can be found by
opening the spring-loaded steam connection
inlet cover
(24)
.
Open the spring-loaded steam connection inlet
cover and push the steam cord connector (with
the two screw heads in the casing facing
upwards) firmly into the steam cord connection
inlet until it clicks into place.
Remove the iron (providing it has been allowed
to cool following any previous usage) from its
locked storage position on top of the steam
generator main body
(16)
(as described in step 2
of ‘Using the steam generator for steam ironing’).
Next, unplug the appliance from the mains
supply outlet.
Remove the iron steam supply cord
(8)
from the
steam cord connection inlet
(23)
by squeezing
the steam cord connector release buttons
(25)
on the top and bottom of the steam cord
connector
(26)
and pull the ironing steam supply
cord out of the unit. Set the iron aside in a safe
place on its heel.
Attach both extension tubes
(51)
together by
pushing the screw-threaded top end of one tube
onto the ‘D’ shaped bottom end of the other
tube. The upper tube has a screw-lock which
must be tightened as indicated on the tubes to
secure them together.
Attach the tube assembly to the jet nozzle
(38)
using the same method as described above.
4
Attach the floorhead attachment
(52)
to the base
of the tube assembly by pushing the screw-
threaded neck of the floorhead onto the ‘D’
shaped bottom end of the lower tube. The tube
has a screw-lock which must be tightened as
indicated on the neck of the floorhead
attachment to secure them together.
1
3
IMPORTANT: Before use, hardfloors should be thoroughly swept and carpets should be thoroughly dry
vacuumed. However, we recommend that the steam cleaner is not used on:
•
bare wooden floors or any surfaces where wood is exposed (as it will absorb moisture and may distort).
•
damaged hardfloors or hardfloors with gaps present (as it will absorb moisture and may distort).
Also, do not steam in one place for an extended period, because the continual heat may cause damage
to carpets and laminate flooring.
Please disconnect and allow the unit to cool before changing cloths and attachments.
RN330009MUK Rev2_Instruction Book 11/12/2013 14:57 Page 10
