Morphy Richards 562000, Инструкция

Страница: 23 / 56

23
10-15 minutes) or ice and should be used only with the Measuring
Cap (1) inserted into the Lid (2) to prevent splashing.
• Speed 6-10 / Pulse For crushing ice, frozen fruit or for ice cream.
Chopping Blade (13)
The Chopping Blade is ideal for use with a wider range of foods
than the Serrator blade, at higher speeds it should be used with
the Measuring Cap (1) inserted into the Lid (2) to prevent
splashing.
• Speed 4-5 For mixing cake mix,
whisking/mixing batters etc.
• Speed 6-8 For blending various foods.
• Speed 9-10 For chopping hard, dry food (e.g. Parmesan cheese,
biscuits or dry bread), or for blending or mixing.
• Pulse For chopping foods while controlling the size of the dice.
Spatula (18)
During normal use, food may adhere to the sides of the Jug. It
may be necessary to scrape the sides of the Jug down partway
through cooking using a silicone spatula, wooden spoon or the
plastic spatula supplied with your Multicooker.
DO NOT USE METAL UTENSILS IN THE MULTICOOKER,
DOING SO MAY DAMAGE THE COOKING SURFACE.
Lock Ring
96
• The Drive Shaft (14) within the Jug can be removed for ease of
cleaning and to prevent food from sticking underneath the seal
within the base of the Jug (4). The Drive Shaft is locked into place
using a Lock Ring (15).
To remove:
1. Ensure there are no attachments in the Jug, and the jug is cool to
touch.
2. Turn the Jug upside down and turn the lock ring anti clockwise.
3. After the first ‘click’ hold the drive shaft and continue to twist the
Lock Ring 45 degrees and remove. The Drive Shaft can now be
removed from the Jug for cleaning.
• To replace insert the Drive Shaft into place and replace the Lock
Ring underneath the Jug. Twist clockwise until it ‘clicks’ and the
Drive shaft is locked into place.
Care And Cleaning
97
• Allow the Jug (4) and any accessories used to cool completely
before cleaning.
• The Lock Ring (15) and Drive Shaft (14) can be removed as
detailed above for easy cleaning.
• If any residue remains in the Jug, with the Drive Shaft in place,
insert hot soapy water and leave to soak for 15 minutes.
• Important: Do not submerge the outer base of the Jug in
water.
• If attached, remove the Blade Covers (17) from the Serrator Blade
(12) and Chopping Blade (13).
WARNING: BLADES ARE SHARP
• Wash the Measuring Cap (1), Lid (2), Mixing Paddle (11) Steaming
Basket (10), Lid Gasket (16), Blade Covers (17) and Spatula (18) in
warm soapy water. Wash the Serrator and Chopping Blades (12),
(13) using the Cleaning Brush (20) and holding them from the top
to avoid cutting yourself.
• Carefully wash the inside of Jug (4) and Drive Shaft (14) with warm
soapy water.
• Dry carefully.
•
DO NOT SUBMERGE THE JUG IN WATER OR WET THE
CONTACTS ON THE BOTTOM OF THE JUG.
• Wipe the Main unit with a damp cloth.
• Dry carefully all the washed parts.
• No parts are dishwasher safe.
Replacing the Lid Gasket (16)
• During cleaning you may need to remove the Lid Gasket from the
Lid. Simply grip the silicone Lid Gasket and gently pull to remove.
• To replace, ensure the arrows that are moulded on the Lid Gasket
are directed towards the lid. Push around the outside of the
moulded ring on the underside of the Lid, until fully located in the
groove.
• The Lid Gasket may discolour during use.
g
MC562000MEE Rev1.qxp_Morphy Richards Instruction Book 23/03/2015 10:36 Page 23