EcoBoost MPPT Operator’s Manual
5
2.0
Important Safety Instructions
4
• Use tools with insulated handles and avoid placing tools
or metal objects on top of batteries.
• Disconnect charging source prior to connecting or
disconnecting battery terminals.
• Determine if battery is inadvertently grounded. If so,
remove the source of contact with ground. Contact with
any part of a grounded battery can result in electrical
shock. The likelihood of such a shock can be reduced
if battery grounds are removed during installation and
maint enance (applicable to equipment and remote
battery supplies not having a grounded supply circuit).
• Carefully read the battery manufacturer's instructions
before installing / connecting to, or removing batteries
from, the EcoBoost MPPT.
• Be very careful not to short circuit the cables connected
to the battery.
• Have someone nearby to assist in case of an accident.
• Explosive battery gases can be present during charging.
Be certain there is enough ventilation to release the
gases.
• Never smoke in the battery area.
• If battery acid comes into contact with the skin, wash
with soap and water. If the acid contacts the eye, flood
with fresh water and get medical attention.
• Be sure the battery electrolyte level is correct before starting
charging. Do not attempt to charge a frozen battery.
• Recycle the battery when it is replaced.
2.1 Overview
Thank you for choosing the EcoBoost MPPT charge control-
ler with TrakStar
TM
MPPT Technology. The EcoBoost MPPT
is an advanced maximum power point tracking solar battery
charger. The controller features a smart tracking algorithm
that finds and maintains operation at the power source's
peak power point, maximizing energy harvest.
The EcoBoost MPPT battery charging process has been
optimized for long battery life and improved system
performance. Self-diagnostics and electronic error
protections prevent damage when installation mistakes or
system faults occur. The controller also features eight (8)
adjustable settings switches, several communication ports,
and terminals for remote battery temperature and voltage
measurement.
Please take the time to read this operator’s manual to
become familiar the many benefits the EcoBoost MPPT can
provide for your PV systems, for example:
• Rated for 12 or 24 volt systems, and 20, 30 or 40 amps of
charging current
• Fully protected with automatic and manual recovery
• Seven standard charging programs selectable with DIP
switches
• Continuous self-testing with fault notification
• LED indications and push-button or meter key functions
• Power terminal maximum of #6 AWG wire.
• Digital meter display options
• Optional remote battery temperature sensor
• 2-year warranty (see Section 6.0)
2.0 GENERAL INFORMATION
