37
4. Usage
4.5.3 Setting the Function Interlocking with Root Canal Length Measurement (Apical Stop)
Setting the Flash Bar Position
You can set the position in the root canal where the apical stop is being operated.
Specify the position of the Flash Bar using “+” or “
−
.”
The position can be set within a range from “Apex” to “2.”
The 0.5 reading on the meter indicates the area near the physiological apical
foramen.
Area near the physiological
apical foramen
Selecting Beep Alarm Sound Volumes
In this setting, you can set the volume of the alarm that sounds when the
fi
le tip reaches or advances beyond a self-set position
in the root canal (the Flash Bar position).
Switching the Apical Stop Function
In this setting, you can switch vibration ON/OFF when the
fi
le tip reaches a self-set position in the root canal (the Flash Bar
position).
Apical stop ON
This function automatically stops the action.
Apical stop OFF
Turning the action OFF prevents the micromotor from
automatically stopping so that the operation may continue even
after the
fi
le reaches the Flash Bar position.
For chairs that incorporate the apex locator (option), the meter is indicated on the right corner of the screen.
* When using the root canal length
measurementfunction, two or more
bars blinking on the meter locks
measurement settings and chair
operation.
Two bars
Page
1
SCALING
SOFT
AS
USER A
Page
2
2
USER A
Page
2
2
USER A
OFF
Beep alarm sound OFF
Beep alarm sound volume 1 (small)
Beep alarm sound volume 2 (large)