8
Operation 2018-02-21
• Handle the Root ZX mini carefully; do not drop, bump or expose the unit to other kinds of impacts or
shocks. Rough handling could cause damage.
• Make sure the probe cord plug is securely plugged into the jack. A poor connection can prevent measure-
ment.
• Do not drop anything on or bang the probe cord plug after it has been inserted into the jack.
• Make sure to match colors of the file holder and contrary electrode to the probe cord.
Measurements cannot be made if these connections are reversed.
• The unit may turn off if its side is bumped.
1. Insert the probe cord completely into the jack on the
left side of the Root ZX mini.
1. Press the Power switch to turn the unit on. The display
will appear in the LCD screen.
* The instrument turns itself off if it is not used for 10 min-
utes.
2. Check that the probe cord is properly plugged into the
jack.
3. Check that the file holder and contrary electrode are
properly connected to the probe cord.
4. Touch the metal part of the file holder with the contrary
electrode. Check that all the meter indicator bars on the
display light up.
2. Insert the file holder’s gray male plug into the gray
female connector on the probe cord. Insert the contrary
electrode into the white female connector on the probe
cord.
Probe Cord
Connector (white)
Probe Cord
Connector (gray)
File Holder Contact
Power Switch
Contrary Electrode
Contrary Electrode
File Holder Plug
Connecting the Probe Cord
Checking the Function
