11
Operation 2018-02-21
Settings
1. Select Memorized Flash Bar
Method
Press Set Switch. Each press of the Set Switch will change
the memory selected in the sequence 01 to 02 to 03 and
then back to 01 again. The Flash Bar set for each memory
will appear when that memory is selected. The memory
selected when the unit is turned off is the one that will be
selected when is it turned back on again.
2. Set the Flash Bar
The Flash Bar can be set anywhere from 2 to Apex (0).
Use it as an estimate of the canal’s working length.
Method
When the fi le is not inserted, hold down the Power Switch
and then press the Set Switch at the same time. Each
press of the Set Switch will move the Flash Bar one bar to-
wards the Apex. The position will be automatically memo-
rized.
• The Flash Bar cannot be set beyond the Apex.
Flashes
