Morgana AutoCreaser Pro 385 Скачать руководство пользователя страница 62

Страница: 62 / 83

It is always recommended to use default settings, however, if default settings are not

providing satisfactory results, operator adjustments may be required.

The floating portion of the paper stack should be equally distributed, i.e. gaps between

each sheet of paper should be equal. To achieve this, the operator may adjust any of the

following parameters:

FAN1 Power (Feed Belt Suction Fan)

: may need to be adjusted to create the proper

amount of suction from behind the feed belts;

FAN2 Power (Choke vacuum pump)

: may need to be adjusted to create the proper

amount of suction from under the lid

NOTE:

Do not adjust FAN2 Power over 100%. Doing so will cause a malfunction.

FAN3 Power (Front and Rear Lead Edge Separation Fans):

may need to be adjusted to

create proper separation within the lead edge of the paper stack;

FAN4 Power (Front and Rear Trail Edge Separation Fans):

may need to be adjusted to

create proper separation within the trail edge of the paper stack;

-Time:

push the “Time” button to the increase the vacuum pump activation time. This

allows the feeder to feed heavier stocks of paper without modifying the Fan 2 value.

When this option is activated, the square next to the stopwatch turns green.

As a rule of thumb, FAN power needs to be increased for thicker sheets / decreased for

thinner sheets.

Recommended Settings Adjustments

NOTE:

Tapping on a value opens a type box.

Press the arrow button to get to the following adjustment menu.

Fan 1

Fan 3

Fan 4

Fan 2

Time

Содержание AutoCreaser Pro 385




















































































Результаты поиска

Содержание AutoCreaser Pro 385

Отзывы:

Похожие инструкции для AutoCreaser Pro 385

Бренды по названию

Популярные бренды

Morgana AutoCreaser Pro 385, Инструкция по эксплуатации

Результаты поиска

Содержание AutoCreaser Pro 385

Отзывы:

Похожие инструкции для AutoCreaser Pro 385

Бренды по названию

Популярные бренды