Moore Industries TDZ2, Руководство пользователя

Страница: 37 / 39

CATEGOR
Y
TITL
E
DRAWING NUMBE
R
REVISED BY
DATE
BY
APPROVA
L
REVISION
DECIMAL
S
.X .X
X
.XXX HOLES:
=+.003-.002/+.08-.0
5
ANGLES
:
NOTICE RE PROPRIETARY INFORMATION: This drawing and the information contained herein are the proprietary property of Moore Industries-International, Inc. (MII) and should not be reproduced or disclosed to any third party without the written consent of an authorized officer of MII.
DRAW
N
CHECKE
D
ENGINEE
R
SCAL
E
DO NOT SCALE DRAWING
TOLERANCES (UNLESS NOTED)
= ±inc
h
= ±.
1
= ±.03 = ±.010 = ± 30'
/m
m
/2.5
4
/0.7
6
/0.2
5
NOTES
:
1. TO PRINT THIS LABEL: JOB SPECIFIC MODEL, SERIAL, YEAR AND TAG NUMBERS WILL BE DOWNLOADED FROM THE MENTOR DATA FILE AND PRINTED ALONG WITH THE FIXED TEXT AND GRAPHICS (SUPPLIED BY THE LEGI 93 DATA FILE
)
TO CREATE THE FINISHED LABEL
.
2. THE FIXED TEXT AND GRAPHIC FIELDS FOR THIS LABEL ARE STORED UNDER NO. 200-251-2207 IN THE LEGI 93 LABEL MACHINE COMPUTER HARD DISK
.
3. MATERIAL: .002 SILVER, IDENTIPLATE (MII P/N 200-301-00) DIE CUT AS SHOW
N
ABOVE. REFER TO LABEL SPEC. DRAWING 200-301-00.
COMPUTERIZED LABEL
200-251-2207
A
1/1
Gus H. Elia
s
INITIAL RELEASE
REAR ID LABEL
TDZ2 [HP]: 4-20mA HART Temp. X-mitte
r
Intrinsically Safe: 12-30Vdc
Gen. Loc., N.I., Type N: 12-42Vdc
ATEX, cFMus, IECEx.
06/0
7
06/0
7
Gus H. Elia
s
S.K.
06/0
7
G.E.
CB
06/0
7
CERTIFIED PRODUC
T
This is a controlled 'Related' or 'Schedule
'
drawing. No modifications are permitte
d
without the notification and approval of
the Certification Engineer (related dwgs.)
or the Certifying Agency (schedule dwgs.)
.
1.712
REF
1.532
RE
F
0.052 R. REF
MODEL: SERIAL: YEAR: FM06ATEX0011X,FM06ATEX0030X,FMG07.0002X
:
4-20mA: I.S. (12-30dc)*, N.I./TypeN (12-42dc
)
Class I, Zone 0, AEx ia IIC, T4@85°C. Class I, Divisions 1 & 2, Groups A-D. II 1G Ex ia IIC T4 / II 3G Ex nA IIC T4
.
Ex ia IIC T4 / Ex nA IIC T4. Use 85°C rated wire
.
*Explosion Hazard: install per IS Dwg. 100-100-71
.
Do not disconnect in hazardous locations. -2207A
0518
CA 91343 U.S.A
.
TAG
:
End-user must mark the checker box
with the intended application
:
Intrinsically Safe or
Type N / Non-Incendive
.