16
The Interface Solution Experts
THZ
2
&
TDZ
2
Programmable Smart HART
Temperature Transmitter and Display
Menu and Tool Bar Legend
Allows such functions as New,
Open, Save and Print functions
Allows you to Upload and
Download configurations and
perform an Address Search
Allows selection of PC COM ports
as well as Communcation Method
(Auto, RS232 or HART)
Allows you to Monitor and
Stop monitoring processes
Provides functions specific to
your Custom Curve table
Controls whether Tool and Status
Bars are viewed on the screen as
well as Additional Status
Information, Long Tag and
Device Information
Displays the version of the
PC Configuration Program
Allows you to enable Burst Mode
Configuration Screens
Note:
Unless otherwise noted, ensure that the PC
Configuration Program is idle before making any
selections or configuration changes to the program.
Also, when attempting to download or upload,
monitoring must be stopped. To do this, click Stop
in the Monitoring dropdown menu, or click the Stop
Monitoring icon on the Tool Bar.
Input
Figure 10.
Input Tab
Input Type–
Select your input type and the
respective range of your input.
Temperature / SV Temperature–
Use this section to
select the temperature unit you wish to view.
If the selected
Input Type
is an RTD or T/C, this sec-
tion is displayed as
Temperature.
If a mV, Resistance or Potentiometer input is selected,
this section is displayed as
SV Temperature.
Filter–
This setting is used to configure the input filter.
The filter is designed to reduce the effects of mains-
induced noise. The input filter frequency value should
be set to the frequency of the local AC supply–either
50Hz or 60Hz.
Input Type
section.
Figure 9-B.
THZ
2
/TDZ
2
PC Configuration Software Main Screen
When Monitoring is selected the Process Variable
window
will appear and display the present Process
Variable readings along with Device Status and Output
Current.
Note:
When Monitoring user is unable to make any
changes to configuration.
