Model 914-X Series Modular Multiplexer System User Manual
Focal Technologies Corporation
Page 12-1
A Moog Inc. Company
Document Number: 914-0601-00
Rev.
5.0
12.0
Feature Upgrades
If a feature upgrade has been purchased, these are the installation instructions. Feature upgrades allow 914-HDE
L1 cards to be upgraded to M1 version, as an example. Contact Focal for upgrade options for your cards.
1. Obtain Feature upgrade codes from Focal, there are 2 codes: Unlock Code and Feature Code. Both codes
are 16 digit hexadecimal alpha numeric numbers
2. Open the 914-HDE diagnostic GUI with the Console 914-HDE connected to a local COM port as per
manual section 3.
3.
Use the “Tools” slide over menu on the left side, and select the “Configuration Tool”.
4. Enter both the Unlock and Feature Code, and select the destination card (remote or console), then press
“Apply”
5. Both remote and console cards can be upgraded from the console side, there is no need to directly access
the remote card, but it must be powered and have a valid optical link to receive the upgrade.
Figure 12-1: Feature Update Via Configuration Tool