Model 914-X Series Modular Multiplexer System User Manual
Focal Technologies Corporation
Page 7-2
A Moog Inc. Company
Document Number: 914-0601-00
Rev.
5.0
Figure 7-2: 914-HDV2 Interface Locations and Pin Numbering
7.1.1 914-HDV2 Video Connections
The 914-HDV2 card has two video ports, supporting 3G/HD/SD-SDI video conforming to SMPTE 259M-C, SMPTE
292M, and SMPTE 424M. On the remote card the video channels are inputs, and on the console they are outputs.
The connectors are a Mini SMB jack, Amphenol P/N 142146-75. Recommended mating plug is Cinch P/N 131-
8403-101, although other 75
Mini SMB plugs may be suitable. Cabling should be RG-179, 75
coaxial type.
Video latency through the media converter system is less than 1
s, not including fiber delays of 5 ns/m.
Figure 7-3: Mini SMB Jack - Amphenol P/N 142146-75
Figure 7-4: Video I/O Locations
7.1.2 914-HDV2 Optical Connections
914-HDV2 cards typically use dual transmitter optics at the remote end, and dual receivers at the console. Note
that the channel nomenclature is inverted when switching configurations.
For single channel 914-HDV2 configurations, the CH1 location (only) should be used.
