Model 914-X Series Modular Multiplexer System User Manual
Focal Technologies Corporation
Page 6-23
A Moog Inc. Company
Document Number: 914-0601-00
Rev.
5.0
6.3.5 914-AX Diagnostic LED Header
The 914-AX card includes a 10-pin header capable of driving 8 LEDs. This is useful for LED integration into an
enclosure. Each LED pin is driven low to turn on an LED, and includes a 267 ohm resistor in series to limit the
current draw. Maximum current draw is 8 mA. Refer to section 4.7 for a sample connection diagram.
The LED header is FCI P/N 20021521-00010T1LF, and the mating part is FCI P/N 20021444-00010T1LF. This can
be used with most
0.050” (1.27mm) spacing ribbon cables.
Table 6-17: 914-AX Diagnostic LED Header Pinout
Pin
Name
Description
1
3.3V
3.3V
This pin can be used to drive the LEDs, Maximum current is
0.5A.
2
AIB TX DATA
Data is transmitting from the AIB module. Active low.
3
AIB RX DATA
Data is received at the AIB module. Active low.
4
N/C
N/C
5
N/C
N/C
6
N/C
N/C
7
N/C
N/C
8
N/C
N/C
9
N/C
N/C
10
GND
Ground, non-isolated, connected to 914-HDE input voltage
ground.
Figure 6-30: 914-AX Diagnostic LED Header
