14
15
www.DeubaXXL.de
www.DeubaXXL.de
14
15
www.deubaxxl.de
www.deubaxxl.de
Service
•
parts. This will ensure that the safety of the
power tool is maintained.
SAFETY INSTRUCTIONS
•
This product is not intended for use by young
supervision.
•
Young children should be supervised to ensure
they do not play with the product.
•
Children and other visitors should be kept well
away from the work area and should not be
•
Always wear eye safety glasses or goggles
to protect your eyes against dust, sparks
and other debris.
•
•
bench grinder.
•
or gases.
•
Ensure you are well balanced and that you
overextend.
•
Do not overload or force power tools. This may
tool.
•
When changing accessories always remove the
power plug from the mains power supply.
•
The power supply cable should be regularly
checked and if damaged should be repaired by
an authorised electrical specialist.
•
Ensure that the switch of the tool is in the
power source.
•
Do not carry the tool by the power cable. This
may cause damage or electric shock.
•
Do not pull the plug out of the power supply by
using the power cable.
•
Protect the cable from heat, oil and sharp
objects.
•
This tool should be stored in a dry, safe area
where children do not have access.
•
Ensure that all spanners and wrenches used
to assemble the tool are removed before use.
•
power supply ensure that the switch is in the
•
Be sure the grinding wheels are not in contact
with the workpiece or any other object before
switching the tool on.
•
disconnect from the mains power supply before
making any adjustments.
•
To avoid the risk of injury ensure grinding wheels
Check before use.
•
Always run the bench grinder for approximately
•
safety equipment such as gloves, helmet and
apron are also recommended.
•
•
Do not operate this tool without the safety
guard, tool supports and safety shield being
•
or table. Make sure it is secure.
•
cause serious personal injury.
•
speed before commencing work.
•
care.
•
Do not touch the grinding wheel or workpiece
•
Do not use damaged or faulty grinding wheels.
•
Only used approved grinding wheels.
•
Only use grinding wheels with the correct bore
size (12.7mm) for the spindle. Also ensure
grinder spindle. Do not use reducing washers
or adaptors for grinding wheels or other
accessories where the bore size is greater than
the size if the spindle.
•
•
•
damage.
IDENTIFICATION
1. Safety Shield
2. Shield Support
3. Wheel Guard
5. Rubber Support
6. Base
7. Tool Support Adjustment Knob
8. Tool Support
9. Grinding Wheel
1
9
8
7
6
2
3
4
5
BEFORE COMMENCING WORK
at the factory.
Ensure the shield supports and safety shields are
NOTE:
release a slight oily smell, this is common and
Advices
The motor of this tool may be damaged if
overloaded. More pressure on this tool will not
motor burn out. Substandard work and shorter
tool life will result from excessive force.
Avoiding Motor Damage:
If you are running the
wheel and material to cool.These will be HOT
and will burn.
