H*38DF PRC Panorama Indoor Gas Fireplace
Page 26
XG0211 - 151126
Installation
Section:
Section 9: Installing the Accessories
Figure 27a. Place Logs' "A" on Left & Right stands.
Installing the H38PR* Logset
The
H38PR*
is supplied with eight (8) fibre logs. The two small
bottom logs (
"A"
)
are mounted on the burner grate by placing
them diagonally onto the supplied Log stands
.
The long Front /
Back logs ("B") are placed against the grate as shown in
Figure
27b
.
Note
: When placing logs, arrange Logs "B" as not to cover
Burner holes.
Next are the Top logs
"C"
which are placed diagonally, as shown
in
Figure 27c.
The last logs
"D"
is then mounted on top of logs
"A"
as shown in
Figure 27d
.
Installing the Ember Material
The ember material is supplied in two packages. Spread the material
evenly around the burner tray, or pile around burner holes for a
realistic effect.
Figure 27c. Log Installation. Place Logs' "C" on-top of Logs "A".
Indentations on-top of Logs' "A"
Figure 27b. Place Logs' "B" as shown, in front of Right-hand
"A", and behind Left-hand "B".
Log A
Log B
Log C
Log A
Log C
Figure 27d. Completed Installation.
Figure 27. Empty firebox showing the Left & Right stands.
Front of Fireplace
Burners
Log Stand
Log Stand
Burner holes (front & back burner),
note hole pattern when placing logs
Air Inlets
If logs are not placed properly, excessive sooting will result.
NOTICE
Do not use ammonia based or abrasive cleaners on the glass, they will permanently
etch the surface. Use an approved gas fireplace glass cleaner such as Kel-Kem or
White off.
NOTICE
Do not operate this fireplace without the glass door or with a broken glass door.
NOTICE
Log D
Log B
Log D
