Monterey Sport Cruiser 260SCR, Руководство пользователя

Страница: 138 / 212

General Care and Maintenance
Cruiser
10-11
Stain Removal
If a spill does occur, it can easily be removed by
following the stain removal chart. All stains should
be removed as soon as possible, as this
enhances the ability to remove the stain.
NOTICE: Most stains should be removed easily
from olefin fibers. If the stain persists, the
cleaning procedure should be repeated to ensure
stain removal. Remember, the sooner the stain
removal process begins, the easier the stain will
be to remove. Under no circumstances should
any solvents normally associated with the dry
cleaning of apparel (perchlorethylene, carbon
tetrachloride, etc.) be utilized, as permanent
damage to the fiber will result.
Windshield
A clean windshield is important. If your boat is
equipped with a glass windshield, applying a
nonabrasive glass cleaner with a soft cloth will
remove most dirt. Clean tinted Plexiglas or plastic
windshields with a mild soap solution and damp
cloth only. Harsh detergents, solvents, chemicals
or dry cloths used on any glass or plastic
windshield will scratch the surface.
Window Channels
Nylon pile is typically used in sliding window
channels. Never use any products that contain
bleaching solutions to clean window channels or
seals. Use only a mild detergent and water
solution for cleaning. If windows stick, spray the
channels with silicone spray while working the
window back and forth.
Teak
Teak does not normally require refinishing, but
should be cleaned occasionally with a teak
cleaner available at a local marine dealer. The
best way to keep teak in top condition is to oil it
regularly with teak oil. Follow the manufacturer’s
instructions and warnings carefully as some
cleaners or oils may damage gelcoat, vinyl or
aluminum. Avoid using steel wool pads when
cleaning; only Scotch-Brite™ or similar
nonmetallic pads are recommended.
NOTICE:
Teak oils and sealers can be harmful to other
materials. Always thoroughly remove any teak oil
that comes in contact with vinyl, gelcoats, etc.
Never varnish teak; the natural oils in the wood
will cause poor adhesion.
If a scratch develops, it can be repaired easily
using fine-grade sandpaper (400 to 1000 grit).
Use a tack cloth to clean sanding residue, and
then apply a small amount of lemon oil. Let dry
and wipe with a soft cloth.
Bilge
A boat’s bilge area accumulates oil and greasy
dirt over a period of time and should be cleaned
periodically. Consult your local marine dealer for
recommendations on special bilge cleaning
products and procedures.
Miscellaneous Stains Removal Process
Coffee, Tea, Coke, Dye, Fruit Juice, Ice Cream, Motor
Oil, Clay, Grease, Blood, Catsup, Chocolate, Milk, Rust,
Latex Paint, Water Colors, Berry Stains, Egg, Salad
Dressing, Wine, Furniture Polish, Fish Formula,
Mayonnaise or Urine Apply warm water and household detergent in minimal
amounts to the stained area. Sponge or scrape until
stain is removed and wash thoroughly with clean water.
Persistent Stains Removal Process
Chewing Gum, Crayon, Ink, Wax, Lipstick, Tar, Polish or
Oil Paint Apply warm water and household detergent.Work well
into the stained area, then flush with warm water.