© 2011 Monte Carlo Fan Company
3/1/2012
3
Before you begin installing the fan, Switch
power off at Service panel and lock service dis-
connecting means to prevent power from being
switched on accidentally. When the service dis-
connecting means cannot be locked, securely
fasten a prominent warning device, such as a
tag, to the service panel.
Warning
-Risk of fire, electric shock, or personal
injury. The fan in this box may be either directly
supported from a structural framing member of
a building and/or may be mounted to an outlet
box or fan brace marked acceptable for fan sup-
port of of 31.8 kg (70 lbs) or less. Most outlet
boxes commonly used for the support of lumi-
naries may not be acceptable for fan support
and may need to be replaced. Consult a qualified
electrician if in doubt.
2
1
Remove the 6 screws attaching the
Mounting neck from the mounting
plate. Retain the 6 screws for re-as-
sembly.
3
Secure mounting plate directly to a joist from
the buliding structure. Use only the appropriate
wood screws and washers included with your
fan.
Caution
: Wood screws must go through into
the building joist.
Note
:If Installing It In The U.S., Do Not Re-
move Knockouts In The Outlet Box
5
Outlet box
Mounting
Plate
Wood
Screws
BUILDING STRUCTURE METHOD
Twist mounting neck and remove
from mounting plate.
4
Install the mounting Plate to approved fan
brace or outlet box, use only the hardware pro-
vided with the fan brace or outlet box.
6
FAN BRACE AND OUTLET BOX METHOD
For Installation in The U.S. only
Screws 2 on each end
and 1 on each side.
Lower upper glass disk onto fan housing and
align 3 holes in glass with 3 holes in fan hous-
ing.
9
Lift mounting neck to mounting Plate and align
screws.
7
Secure mounting neck to the mounting plate
with 6 screws to become a complete mounting
bracket.
8
