© 2011 Monte Carlo Fan Company
3/1/2012
5
Install decorative cap.
25
Tighen the 3 screws holding the arch
arms securely.
21
Thread leadwires and safety cable
through the canopy. Place canopy
over the downrod.
26
Push the yoke cover down into place.
22
Plug in electrical connections there
are 2 double plugs from arch assem-
bly one for the fan and one for the up
and down lights.
Install 6 x 15 watt candelabra tor-
pedo shape bulbs.
24
23
Tighen all 6 screws for arch arms se-
curely.
20
Install arch mount by using clips in
plastic bag. Place clip through tab
and fasten securely.
19
Set dip switches on the Remote Transmitter and
Remote Receiver to the same settings. This must
be done so the units will communcate properly. If
you have other fans you can set to control from
one transmitter by setting both receivers the same
as the transmitter. If you have more than one fan
with remote. You can set the dip switches to differ-
ent positiosns to have seperate control.
Remote Transmitter Dip swtiches
Remote Receiver Dip switches
27
