Monoprice 13860 Maker Select, Руководство пользователя

Страница: 33 / 50

33
Advanced Tab
The options on the Advanced tab control
machine, quality, and speed issues.
Nozzle Size (mm) - This setting tells the
software the size of your nozzle, which
determines the width of each printed line. This
printer has a 0.5mm nozzle width.
Speed (mm/s) - This setting determines how
quickly the printer will retract filament if you
have the filament retraction option enabled on
the Basic tab. We recommend keeping this at
25mm/s.
Distance (mm) - This setting determines how
far the filament is retracted if you have the
filament retraction option enabled on the Basic
tab. Higher thermal retaining filaments, such as
PLA, benefit from longer retraction distances.
We have found that a value between 1 - 3 mm
is a good starting range.
Initial Layer Thickness (mm) - This value determines the thickness of the initial layer printed
on the build plate. A thicker initial layer can help prevent adhesion issues. However,
adjusting this value can cause problems with the printer's leveling system, so we
recommend leaving this at the default values. Adjust at your own risk.
Initial Layer Width (mm) - This value determines the width of your first printed layer. A
wider layer can help prevent adhesions issues. We suggest 125% as a good starting value.
Dual Extrusion Overlap (mm) - This value determines how much overlap there is between
filament when using a dual extrusion head and printing two colors. This helps the two
different colors adhere to each other. This printer uses a single extrusion head.
Travel Speed (mm/s) - This value determines how quickly the printer moves the print head
when not extruding filament. We recommend a travel speed between 125 - 150 mm/s.