Monoprice 13860 Maker Select, Руководство пользователя

Страница: 28 / 50

28
To max - Click the To max button to increase the size of the model to the
largest possible size.
Reset - Click the Reset button to restore the model's original dimensions.
Mirror - Click the Mirror button to display buttons for flipping the model
within the X, Y, and Z axes. Clicking one of the Reset buttons will reset
any flipping you may have done.
Rotate View - Right click within the 3D area and drag to rotate the camera around the
model. This allows you to look at the model from any angle.
View Modes - Click the View mode button to reveal five view
options for looking at your model in different ways.
Normal - This is the normal view showing the outer portion of
the model.
Overhang - This view shows highlights in red
those areas where your model could benefit
from support structures. Use this option to
examine your model to make an informed
decision about whether to print support
structures.
Transparent - This view removes the skin of the model,
allowing you to see any printable elements within.
X-Ray - This view is similar to Transparent view in that
it allows you to see inside your model.