49-80329 Rev. 5
17
Installation Instructions
11
INSTALL LOWER DUCT
■ Place rear duct cover onto the hood.
■ Place front duct cover onto the hood.
■ Secure the duct covers with 6 screws.
12
INSTALL DUCT COVER TRIM
■ Install side brackets to secure the lower duct tightly
against the upper duct.
■ Hold lower trim strips (narrow pieces) with hooks
facing down. Place the hooks inside the slots and
slide downward.
■ Select the correct size upper trim strips and press
into place.
13
INSTALL METAL FILTER
IMPORTANT:
Check to be sure that the main ON/
OFF switch next to the motor is in the ON position.
■ Tip the filter into the left or right side of the opening.
Lift the filter to the opposite side and into the filter
lock.
■ To remove the filter, pull the filter lock downward.
14
FINALIZE INSTALLATION
■ Remove all tape and packing material.
■ Refer to the Owner’s Manual for operating
instructions.
INSTALLATION—VENTED TO THE OUTSIDE
Front bottom duct cover section
(snap into place and secure
with 6 screws – 3 per side)
Plan diagram top
view
Front bottom duct
cover sections
Upper
trim
strip
Lower
trim strip
Lower
trim
strip
Upper
trim
strip
Side
bracket
Filter lock
1” = 2.5 cm; 1’ = 0.3 m
