au
Monoflex
™
I N S T A L L A T I O N A N D U S E R ’ S I N S T R U C T I O N S
ART NOS. SH103XS, SH103S, SH103M, SH103L & SH103XL
WARNING!
Product should be installed and
fitted by a qualified rehab technician.
WARNING!
Because of the risk of choking, it is
dangerous to use this product without stabilizing
the pelvis – always use with a properly fitted
pelvic support belt.
USE:
WARNING!
This product should only be used
for positioning a person in a wheelchair or work
chair. It is NOT intended for use as a transporta-
tion safety device, as a personal restraint device,
or in any other application where its failure could
result in injury. Misuse of this product is
unauthorized and unsafe.
WARNING!
Accidental release of this shoulder
harness can allow the user to fall forward. If the
user’s movements or cognitive abilities could lead
to accidental release, a caregiver must be present
at all times during its use. Ensure that all caregivers
know how to unfasten the product. Failure to do
so may delay release in an emergency.
WARNING!
As with any new seating support,
this product may change the way a person sits.
Users must continue to practice regular pressure
relief activities and skin integrity checks, not only
where this product contacts the user, but also in
primary pressure-bearing areas such as the
sacrum, legs, and buttocks. If increased skin
redness or irritation occurs, discontinue use and
consult your physician or seating specialist.
Failure to do so may result in serious injury, such
as pressure ulcers.
MAINTENANCE:
Check periodically for signs
of wear in the stitching, webbing, and pads. If
significant wear is found, contact your supplier
for qualified repair or replacement by Bodypoint.
Under no circumstance should this product be al-
tered or repaired by unqualified persons – health
and safety depend on it!
40C
CLEANING:
Machine wash, warm,
40°C (100°F). Do not bleach. Tumble dry, low
temperature, or drip dry. Do not iron. Placing the
product inside a cloth bag during washing helps
prevent scratches to the product and the
machine.
ATTENTION: WARRANTY AGAINST DEFECTS
A copy of this warranty is also available at www.
seatingdynamics.com.au.
Warranty period: 12 months limited.
1. Seating Dynamics Pty Ltd ABN 21 086 494 117
(“SDL”) undertakes to the end purchaser (the
“Customer”) that the Products will be free of
faults arising from defects in Workmanship or
Materials for the duration of the Warranty Period
on the terms and conditions set out in this
Warranty.
2. In this Warranty the following definitions apply:
a. Form means a warranty claim form issued by
Seating Dynamics Pty Ltd in respect of the
Products.
b.
Products
means the goods distributed or sold
by SDL set out in the table above.
c.
Material
means a material or component used
by the manufacturer in the manufacture of
Products distributed and/or sold by SDL.
d.
Retailer
means the authorised dealer of
Products from whom the Customer purchased
the Product.
e.
Warranty Period
means the warranty period
These instructions provide important information for the safe use and maintenance
of all Bodypoint Monoflex™ Chest Belts. Give these instructions to the user or their
caregiver and review them to ensure that they are understood.
558 First Ave. S., Suite 300 | Seattle, WA 98104 | 206.405.4555 | 800.547.5716 | www.bodypoint.com
BPI076-au 2015.8
MDSS GmbH
Schiffgraben 41
D-30175 Hannover
Germany
A
N
SI
|
RESNA
IS
O
T E
S T E D
