Monitor Audio IA150-2, Руководство пользователя

Страница: 7 / 172

IA800-2C
Connection Descriptions
FRONT PANEL
1. Power Button
2. Channel Indicator LED
3. Output Volume Control
REAR PANEL
4. Speaker Block Connector
5. Channel RCA Inputs/
Outputs
6. Voltage Trigger Input/Output
7. IR Control Input/Output
8. IR Status LED
9. Ethernet (RJ-45) Connection
10. AC Fuse Holder
11. Power Cord Connection
ENGLISH
1 2
4 6 7 8 9 5 11 10
3
AC Fuse Holder
This compartment houses the amplifier's internal
fuse, should the fuse ever require changing the
compartment can be opened by inserting a flat
headed object such as a screwdriver and turning
anti-clockwise. Refer to the information printed on
the product below the fuse holder for the correct
fuse specification.
Power Button
This is the main power switch for the amplifier.
Please ensure the amplifier is turned off if not used
for long periods of time.
Output Volume Control
'Connect' models only.
Use a small flat headed screwdriver to increase or
decrease the volume of the output. This is linked
to the "Output Volume" on the web portal. Refer to
page 10. Turn anticlockwise if clipping/ distorting
(as indicated by the channel LED on the front), or
clockwise for more volume.
Channel RCA Inputs
Stereo left and right RCA connectors for connecting
audio sources. Models with an increased number
of channels such as the IA60-12 will feature more
inputs for the number of output channels available.
Channel RCA Outputs
Stereo left and right RCA connectors for connecting
to external playback devices such as active
subwoofers or to additional amplifiers.
Volume Level Control
IA150-2 and IA60-12 only.
Used to increase or decrease the output volume.
Reduce if the speakers are clipping, increase if the
output volume is too quiet.
Ethernet (RJ-45) Connection
'Connect' models only.
Used to make connection to a wired network. Once
connected amplifier will become visible on the
network to other devices. Refer to page 8 on how
to setup your 'Connect' amplifier.
Voltage Trigger Input and Output
Trigger connection can be made to the input/
output of another device. When using the input the
amplifier will switch on and off with the connected
device. A device connected to the output of the
amplifier will switch on and off with the amplifier.
monitoraudio.com 5