Page 9 of 110
Rev. G
Figure 1
Section 3.1: Mounting
DIN Rail Mount:
The mCore unit should be mounted vertically on a horizontal DIN rail. Tilt the unit
to a 45-degree angle and insert the top lip of the DIN rail bracket onto the DIN
rail. While pushing down, attach the bottom lip to the DIN rail to snap the unit
into place, as illustrated in Figure 1. A minimum of 1” of space should be
maintained on all sides of the unit to ensure proper heat regulation. The device’s
mounting pad is shown below in Figure 2.
To remove the unit from the DIN rail, push down on the unit until the bottom lip
is clear from the rail. Then pull out from the bottom. The unit should remove with
ease.
Figure 2
