manualshive.com logo in svg

Money Controls ARDAC WACS-2, Руководство по спецификациям и регулировке

Поделиться
Скачать
Money Controls ARDAC WACS-2 Скачать руководство пользователя страница 22

ARDAC WACS-2                                          Specification and Adjustment Manual 

44X477 Rev. 8 
05/ 16/ 03 2-2 

Power Supply and Voltage Requirements 

 

The WACS-2 operates from an external regulated 12 to 24 Volt DC power supply.  
Section 1, Description and specifications, has details on the recommended power requirements.  

 

Connection of the WACS-2 System to the Host 

 

WACS-2 units connect to the host equipment through the DB-25 or DB-9 connector on the chassis. The 
specifications for each of these connectors are provided in Section 1, Description and Specifications. 

 

- RS-232 ARDAC-2 serial communications pass through the DB-25 or optional DB-9 I/O 

connector. 

 

- The 2-pin power connector must be connected to a host (or bench test) power supply meeting the 

specifications of Section 1, Description and Specifications. 

 

 

Install New or Up-Graded EPROM / FLASH on Microprocessor Board (Optional) 

 

It may become necessary to install or change the EPROM / FLASH on an acceptor’s Microprocessor board.  
The WACS-2 units are shipped from the factory with the latest version of the firmware for the specified 
country, currency and application.  

 

An EPROM / FLASH change may be required to: 
 
- Adapt the System to a new country, currency or application. 
- Change or increase the type of notes or currency handled by the System. 
- Up-grade an already installed acceptor with the latest firmware version. 

 
 

Figure 2-1 

EPROM / FLASH Location 

 

Содержание ARDAC WACS-2














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды