Monessen Hearth VFI33C(N/P)(V/I) Скачать руководство пользователя

Страница: 31 / 44

VFI33 Vent Free Gas Fireplace System

20307670

Location of Piezo Ignitor, Control Knobs and Switch on Millivolt Unit, Hi/Lo Remote Control and Manual Unit

This appliance is equipped with a piezo ignition device which automatically lights the pilot. If the piezo

is not working properly see Match Lighting Instructions on Page 33.

BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor

because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS:

• Do not attempt to light any appliance.

• Do not touch any electric switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instruc-

tions.

• If you cannot reach your gas supplier, call the fire department.

Use only your hand to push in, or turn the gas control knob. Never use tools. If the knob will not push

in or turn by hand, don't try to repair it. Call a qualified service technician. Force or attempted repair

may result in a fire or explosion.

Do not use this appliance if any part of it has been under water. Immediately call a qualified service

technician to inspect the appliance and to replace any part of the control system and any gas control

that has been under water.

FOR YOUR SAFETY READ BEFORE LIGHTING

OPERATING INSTRUCTIONS

WARNING: If you do not follow these instruction exactly, a fire or explosion may result

causing property damage, personal injury or loss of life.

Piezo Ignitor

Control Knobs

On/Off Switch

Blower Control

Содержание VFI33C(N/P)(V/I)













































Результаты поиска

Содержание VFI33C(N/P)(V/I)

Отзывы:

Похожие инструкции для VFI33C(N/P)(V/I)

Бренды по названию

Популярные бренды

Monessen Hearth VFI33C(N/P)(V/I), Инструкция по установке и эксплуатации

Результаты поиска

Содержание VFI33C(N/P)(V/I)

Отзывы:

Похожие инструкции для VFI33C(N/P)(V/I)

Бренды по названию

Популярные бренды