background image

October 2004  

P/N 61D0006 • Rev. 2

LIMITED WARRANTY 

FACTORY-BUILT FIREPLACE AND COMPONENTS

(EXCEPT BLOWERS)

WHAT IS COVERED AND FOR HOW LONG

• 

Five-Year Coverage:

 For five years from the date this fireplace and components are first purchased for use, Monessen Hearth 

Systems will, at its option, repair or replace any defective part of this fireplace or components, or refund to you a sum not to exceed 

the factory retail price in effect at the time of purchase.

•  

Ten-Year Coverage:

 From the sixth through the tenth year following the date this fireplace or accessory is first purchased for use, 

Monessen Hearth Systems will make available to you, at our factory, a free replacement for any defective part in this fireplace or 

accessory. 

•  

Twenty-Five-Year Availability of Replacement Parts: 

From the eleventh through the twenty-fifty year following the date this 

fireplace or accessory is first purchased for use, Monessen Hearth Systems will make available at our factory replacement parts for 

this fireplace or accessory, which you may purchase for the list price current at the time your purchase order is received. 

WHAT IS NOT COVERED

This limited warranty does not cover:
•  Transportation or shipping cost.
•  The cost of a service call to diagnose trouble.
•   Painted surfaces.
•   Damage or defect caused by improper installation, accident, misuse, abuse or alteration.
•   Poor ventilation of smoke or gases caused by air-conditioning and heating systems, exhaust fans, or pressure differentials produced 

by wind.

•   Broken glass components
•   Cracks in ceramic and castable parts that do not affect safe operation.
•   We do not warrant this fireplace to be in compliance with your local building code. Building codes vary greatly throughout the coun-

try, and you should determine whether your local building code contains restrictions on the use of this fireplace before you purchase 

it. 

•   Blowers or fans, which are warranted separately.
•   Heat loss due to the passage of heat or air through or around the fireplace.
Also, under our five year coverage, we do not pay the cost of removal and replacement of any portion of the structure in which the fire-

place is situated, made necessary by the repair, removal or re-installation of the fireplace.
And under our twenty-five year warranty of availability of replacement parts, we only promise to maintain a supply of replacement parts 

at our factory for you to purchase.

LIMITATIONS AND EXCLUSIONS

1.  No one has authority to add to or vary this limited warranty, or to create for Monessen Hearth Systems any other obligation of liability 

in connection with this fireplace and accessory. 

2.   Monessen Hearth Systems shall not be liable for incidental, consequential, special or contingent damages you might suffer as a result 

of its breach of this written warranty or any implied warranty. Some states do not allow the exclusion of limitation of incidental or 

consequential damages, so the above limitations may not apply to you.

3.  This warranty applies only to the original purchaser of the fireplace or to the original owner of the dwelling when the fireplace is 

installed in a new dwelling and may not be transferred.

5.   This warranty applies only to a fireplace sold and used in the United States.
For information about this warranty, contact:

 

Technical Services

 

Monessen Hearth Systems

 

149 Cleveland Drive

 

Paris, Kentucky 40361

Содержание 36" and 42" Wood Burning Fireplaces BWB400A













































Отзывы: