86
AS 914 TI
Manuel d’utilisation
Il est conseillé de bloquer les jantes en alliage
d’aluminium, si vous avez à travaillé avec celles-ci, tout
en utilisant le kit de protection des mors coulissants de
façon à éviter d’endommager la roue.
Il faut également utiliser le kit de protection pour le
blocage extérieur des roues de 10 po.
AVIS
9.5 DÉMONTAgE DE LA ROUE
- Positionner la tête de montage/démontage contre le rebord de la jante.
- Bloquer le mouvement vertical de la tête avec le levier (Fig. 20a).
- Tourner le bouton de pivot (5) afin d’ajuster la tête de montage/démontage, comme
illustrée dans la Fig. 20b.
- Aider une partie du talon supérieur à entrer dans la base creuse de la jante en appuyant
sur le flanc opposé à la tête de montage/démontage (Fig. 21).
- Insérer et positionner le levier détalonneur sur la tête de montage/démontage (Fig. 21).
- Soulever le talon supérieur du pneu par-dessus une partie du bouton de la tête de
20a
5
20b