Monark 928 E, Руководство по обслуживанию

Страница: 35 / 40

ENGLISH
MONARK 928 E 35
dAtA
Age 35
dAtA
Max HR 185
TIME
NEXT
HR
RPM WATT
dAtA
TIME 3:00
dAtA
Init WATT 25
dAtA
Step WATT 25
TIME End
HR
RPM WATT
TIME HI
HR
RPM WATT
TIME Lo
HR
RPM WATT
INCREMENT PROGRAM
Set the time for
each step
Start
Increment
program
Stop
Increment
program
The test is stopped when:;
•
The cadence is <30 for
more than 5 seconds
• You press START
STOP
• Reaches 700 W in
workload
Set start
workload
Set workload
increase per step
The results are displayed on three
pages that you switch between with
the (+/-) button.
End value Max value Min value
Time to the
next step
Current
time
NOTE!
If the display does not get any rpm
indication at start up the test stops.
Press ENTER to restart.
Press ENTER (for 5 seconds
during the test) and a new
test is started with the same
settings.
Press START STOP (for 5
seconds during the test) and
the test is reset.
Set age
Choose max HR
The display suggests an
estimated max HR based
on your age (220-age)
Change if desired.
Increment is a testing protocol, where the power is increased according to a predetermined schedule.
The test continues until the test manager or test person cancels the test.