Monark 928 E, Руководство по обслуживанию

Страница: 24 / 40

ENGLISH
24 MONARK 928 E
1
2
1
2
3
4
5
6
7
8
9
10
11
13
14
12
DISPLAY WORKLOAD ADJUSTMENT
Changing the workload occurs either by another pedalling
speed, or by pressing the (+/-) button on the display to
increase or decrease the brake belt tension against the
flywheel. See
Fig: Workload control and connections.
NOTE!
Do not expose the electronic
display to direct sunlight or
extremely high temperatures. Do
not use solvents when cleaning,
only a dry cloth.
Fig: Workload control and connections
1) USB
2) Workload adjustment (+/-)
When the USB connector is plugged in or when the
display detects a connected computer, a quick double-
beeps is heard. A symbol for USB lights up in the display.
Otherwise, the display is switched off except for rpm and
pulse rate. When the display is connected to a computer,
it switches to passive mode. No buttons are active except
the HEART button (to pair the display and chest belt).
The socket for the USB connector is shown in Fig:
Workload control and connections.
Fig: Electronic display (Training)
1) % of max HR
2) Time
3) Kcal (estimated value)
4) Speed (km/h)
5) Pedal revolutions (rpm)
6) START STOP
7) ENTER
8) (+/-) button
9) Heart rate (HR)
10) Distance (km)
11) Workload (Watt)
12) Program
13) PROGRAM
14) HEART button
SLEEP MODE
Sleep mode is activated after 10 minutes if you don't
press any button or if no rpm is recorded.
All settings are saved, but the personal settings are erased
(to protect your personal privacy).
The display wakes up when you press any button or if
rpm is recorded. The display starts up in ‘Quick start’
mode.
CONNECT TO EXTERNAL UNIT
QUICK START
’Quick start’ can be used as a separate program. (If
START STOP is pressed, the TRAINING program is
activated.)
The program is active and starts with base power, adjust
with the (+/-) button. No time is counted so you can
warm up, use it as "quick start" or exercise without
logging any values.