Monark 915E, Инструкция по эксплуатации

Страница: 12 / 18

Fig.11
Bromsbana
Slipduk
11
Fig. 12 Fig. 13
Låsfjäder
Kedjelås
Kedjespel
Kedjesträckare
Axelmutter
CLEANING THE BRAKE SURFACE
Release the tension control so that the brake groove sits loose around the flywheel. Then pull off the
friction band from the wheel.
Rubbing down can be carried out more easily if someone sits on the bicycle and pedals slowly and
carefully.
Unevenness in the brake groove should be removed with fine abrasive paper or abrasive cloth.
Otherwise the friction band will suffer from excessive wear and noise will occur. Then wipe clean with a
dry cloth.
Keep the brake groove clean and dry at all times. Under no circumstances use lubricant.
When necessary change the friction band at the same time as you clean the brake groove.
Lubricant must not be used on the brake groove.
Abrasive cloth
Brake groove