Monark 915E, Инструкция по эксплуатации

Страница: 4 / 18

4
CONGRATULATIONS
Congratulations on acquiring your Monark Energy 915
We hope that you get a lot out of training on this bicycle.
Training tips can be found at the end of this booklet.
Elderly people and physically weak persons should consult a doctor before starting their training.
GENERAL
Description
Monark has produced test and training bicycles for over 40 years. Your bicycle has been produced in
accordance with the highest quality requirements.
Monark Energy 915 is equipped with variable-speed brake and rapid brake in the same control lever.
With a simple hand grip you decide yourself what load to apply. The bicycle has a heavy flywheel with
fixed rim, giving even velocity. This bicycle is suitable for all ages.
Guarantee
Even with a quality product there can arise occasional defects in material and manufacture that are
covered by the guarantee. If such a defect should occur with your training bicycle you should, in
accordance with the Consumer Purchases Act, contact the place of purchase.
Serial number
When contacting the place of purchase or manufacturer the model number and serial number of the
bicycle should be given.
The model number is located on the side of the bicycle and the serial number under the rear of the
bicycle.
ASSEMBLY
Unpacking
Turn the box according to the instructions on the
outside. Unpack all the parts from the transport
packing and remove all the packing on the
bicycle.
Check that all the components are present, as
listed below:
1 set Handlebars 1
Monkey wrench 1
Bicycle 1
Socket wrench 10-13 1
Seat with seat post 1
Torque wrench TX25 1+1
Stay tube, front and rear 3
Thrust washer for locking knobs 1
Brake lever 3
O-rings for thrust washers 1
Speed indicator with attachment 1
Allen key 3
Locking knobs 1
Stop screw 1 pr
Pedals 1
Training programme 2
Toe clips 1