Press
or
to change
the digit that blinks.
Press
or
to
increase or decrease
the value of the
blinking digit. Hold
for auto increment or
decrement.
4. MODES OF OPERATION
The Nova-
Pro has three modes of operaon:
STROBE
,
LASER
and
TACH
(Tachometer). The mode can be changed in the Mode Menu (
see secon
5.2
). Each are described in the secons below:
4.1
STROBE Mode
In this mode the strobe generates the flash rate from an internal
generator set by the user. The strobe will not flash unl the trigger
is depressed. The strobe will output a pulse signal from the output
jack at the rate of the internal se8ng whether the trigger is pressed
or not. The user can set the flash rate using several methods.
4.1.1
Joysck
Pressing any buon on the joysck will cause a digit on the
display to start blinking—this is the digit that will be edited.
There is a rollover effect when the digit is changed—if
incremenng the units digit 99 will roll over to 100. If the user
does not increment or decrement a digit within 5 seconds the
edit mode will be cancelled.
7
