MONARCH INSTRUMENT Nova-Pro 300 Скачать руководство пользователя страница 35

Страница: 35 / 40

The Nova-Pro Charging Station has an light emitting diode (LED) that
indicates the state of the battery/station. The LED indicates the following:

Green

On / No Baery or Baery Charged

Red

= Charging

Flashing Red =

Error / Replace Baery

Baery charge me will be up to 6 hours depending on Baery Pack
and residual charge. Once the baery is charged the charger will

switch to trickle charge mode—

the baery should be removed once

the charge LED turns green.

9. AC POWER OPTION

The Nova-Pro 300 can be ordered speciﬁcally with

the AC Power Opon for connuous operaon from
AC power. The AC Power Opon can also be
ordered as a separate opon for the Nova

-Pro 500.

Simply insert the AC Power Opon into the Nova

Pro (matching the keyed slot) unl it clicks into place and use the capve

screw to secure into place. Then plug the wall power supply into an
outlet (115Vac to 230Vac) using the appropriate interchangeable plug.

10. WALL POWER SUPPLIES

The wall power supplies provided with the
Nova-Pro have interchangeable plugs
allowing them to be used with AC outlets
in diﬀerent countries.

To change the plugs, depress the buon on

the installed plug and slide the plug up and out of the power supply.

Select the correct plug and slide it back into the power supply unl the

plug seats ﬁrmly. Make sure the plug cannot slide out.

Содержание Nova-Pro 300









































Результаты поиска

Содержание Nova-Pro 300

Отзывы:

Похожие инструкции для Nova-Pro 300

Бренды по названию

Популярные бренды

MONARCH INSTRUMENT Nova-Pro 300, Инструкция по эксплуатации

Результаты поиска

Содержание Nova-Pro 300

Отзывы:

Похожие инструкции для Nova-Pro 300

Бренды по названию

Популярные бренды