MONARCH INSTRUMENT Nova-Pro 300 Скачать руководство пользователя страница 34

Страница: 34 / 40

•

REMOVE Baery Pack from unit before storing for long periods.

•

DO NOT DISPOSE of the Lithium-

Ion baeries as unsorted

municipal waste. The baeries need to be RECYCLED in

accordance with local regulaons. The baeries should be

sent to a recycling center or returned to the factory using
appropriate shipping methods.

The Nova-

Pro Baery Pack is speciﬁcally keyed to ﬁt in the Nova

-Pro and

Charger Base one way only. Insert the Baery Pack into the Nova

-Pro

unl the clips lock into place. To remove, squeeze clips on the Baery

Pack to release from the Nova-

Pro. The Baery Pack can also be screwed

into the Nova-

Pro using the aached capve screw.

8.1

Low Baery Funconality

Low baery icon will blink when baery pack needs to be

recharged. The unit may sll be used for a short me.

The Nova-

Pro will display “LOBAT” and shut down when the baery

pack is exhausted and must be recharged.

8.2

Charging the Baery Pack

The Nova-

Pro Baery Pack must be

removed from the Nova-Pro to be
charged using the Nova-Pro Charging

Staon (shown right) and power

supply provided.

CAUTION: Never aempt to charge
the Baery Pack with anything

other than the Charging Staon and

power supply provided with the
Nova-Pro.

LED

Power

Supply

Input

Key

Содержание Nova-Pro 300









































Результаты поиска

Содержание Nova-Pro 300

Отзывы:

Похожие инструкции для Nova-Pro 300

Бренды по названию

Популярные бренды

MONARCH INSTRUMENT Nova-Pro 300, Инструкция по эксплуатации

Результаты поиска

Содержание Nova-Pro 300

Отзывы:

Похожие инструкции для Nova-Pro 300

Бренды по названию

Популярные бренды