MONARCH INSTRUMENT F2A1X, Инструкция по эксплуатации

Страница: 5 / 16

2
Figure 1 F2A1X Module – top view
Before mounting the unit to a panel all user options should be set. See
Sections 3 and 4.
2.1 Power
Power to the unit is connected to the 4-way terminal block marked DC
INPUT 12 – 24 V dc . Refer to Figure 2.1 above. Note that these inputs
are polarity sensitive. Connect a supply of 12 to 24 V dc (with a 150 mA
source capacity) ensuring that the positive wire goes to the + terminal
and the common or negative wire goes to the – terminal.
2.2 Analog Out
The Analog Out terminals are the source for the voltage or current
output as ordered. These terminals are polarity sensitive and are
and – accordingly.
The F2A1X Frequency to Analog Module may be equipped with either
a Current Output or a Voltage Output depending on how the unit was
ordered. The Analog Out terminals are the source for the voltage or
current output. These terminals are polarity sensitive and are marked
+ and – accordingly.