the menu items “H-Position” to “Phase” are
corrected.
Power Save
and
Anti Retent
see chapter 9.3.1
9.4 Menu page 4: Basic settings
Sleep Timer
(sleep function)
Via this menu item a time can be defined after
which the monitor is automatically switched to
stand-by. It is possible to select “Off” (function
off), 15, 30, 45 or 60 minutes with the button
or
.
The sleep function can also conveniently be
adjusted via the button SLEEP
(12)
chap -
ter 8.9.
Language
(language of the menu)
It is possible to switch between English and
an Asian language with the buttons
and
.
OSD H-Position, OSD V-Position
(menu position on the screen)
line “OSD H-Position”
button
= move menu to the left
button
= move menu to the right
line “OSD V-Position”
button
= move menu downwards
button
= move menu upwards
OSD Timeout
(insertion time of menu)
Via this menu item it is defined how long the
menu will remain inserted after pressing the
last button. The adjustment also applies to
other screen insertions outside the menu
(e. g. volume scale or source list). Reduce the
time with the button
or increase it with the
button
(adjusting range 5 to 60 seconds).
OSD Halftone
(transparency of the menu)
Via this menu item the transparency of the
menu and of all screen insertions outside the
menu can be adjusted:
button
= increase transparency
button
= reduce transparency
Memory Recal
l (reset)
When activating this menu item, the menu
adjustments and volume adjustment are reset
to the factory settings. Press the button
or
: The adjustments are reset and the menu is
exited.
Note: Individual values of the “user” setting in the sub-
menu “Color Temp.” (
chapter 9.1.2) and settings of
the menu items “H-Size” to “V-Position” in the menu
version “Function” (
chapter 9.3.1) are not reset.
The line
S / W Version
at the end of the menu
page which cannot be selected shows the pres-
ent software version of the monitor.
9.5 Menu page 5:
Multi-window Adjustments
All settings of this menu page (except for the
menu item “Border Color”) can also be made
conveniently via the buttons of the remote control
chapter 8.8.
Multi Window
(multi-window display)
It is possible to select one of the following
adjustments with the button
or
:
“Off”
no multi-window display
(for this adjustment all remaining
menu items of the page are
deactivated)
“PIP”
“picture in picture”: the picture of
a second signal source is in
-
serted in reduced size in the full
screen picture of the main signal
source
“POP
Full”
“picture outside picture”: the
screen is divided into two halves,
the left half shows the full screen
picture of the main signal source,
the right half shows the full
screen picture of a second signal
source
Sub Source
(second signal source)
Select the second signal source with the but-
ton
or
:
– If the main signal source is connected to the
input AV IN1 (27) or AV IN2 (29), the source
at the VGA input (26), DVI input (25) or
HDMI
TM
input (24) can be selected as a
second signal source.
– If the main signal source is connected to the
VGA input, DVI input or HDMI
TM
input, the
source at the input AV IN1 or AV IN2 can be
selected as a second signal source.
Size
(size of the picture inserted)
Select the size of the picture inserted in the
PIP mode with the button
or
:
“Large”, “Small”, “Mid”.
Position
(position of the picture inserted)
Select the position of the inserted picture on
the screen in the PIP mode with the button
or
:
“Top L”
top left
“Bottom L”
bottom left
“Bottom R” bottom right
“Top R”
top right
Border Color
(colour of the border line)
Select the colour of the border line between
the pictures with the button
or
: “Black”,
“White” or “Blue”.
Picture Swap
(swap of the picture assignment)
Swap the picture assignment for the main sig-
nal source and the second signal source with
the button
or
.
10 Specification
Diagonal
screen size: . . . . . 48 cm (19″)
Maximum
display resolution: SXGA 1280 × 1024 pixels
Colour system: . . . PAL / NTSC (auto)
Angle of view . . . . hor. 170°, vert. 160°
Time of response: 5 ms (GTG)
Pixel distance: . . . 0.294 mm
Brightness: . . . . . . 450 cd / m
2
Contrast ratio: . . . . 1000 : 1
Colour display: . . . 16.7 million colours
Lifetime of display: 100 000 hours
Hor. resolution: . . . 625 TV lines (PAL),
600 TV lines (NTSC)
Hor. frequency: . . . 24 kHz – 82 kHz
Vert. frequency: . . 50 Hz – 85 Hz
Inputs for the
signal sources: . . . 1 × HDMI
TM
19-pole
(jack type A)
1 × DVI-D 24-pole
(via DVI-I jack)
1 × VGA 15-pole
(D-Sub jack)
2 × composite (BNC jacks)
1 × stereo audio
(3.5 mm jack)
Video outputs: . . . 2 × composite (BNC jacks)
Speaker: . . . . . . . . 2 × 2 W
Power supply: . . . . via supplied PSU connected
to 230 V~ / 50 Hz
Ambient
temperature: . . . . . 0 – 40 °C
Dimensions: . . . . . 420 × 360 × 60 mm
(w / o base)
Drill holes for the
bracket mounting: VESA-75 standard
Weight: . . . . . . . . . 6.9 kg
Subject to technical modification.
13
GB
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction
manual may be reproduced in any form or by any means for any commercial use.
