Monaco LaPalma, Руководство пользователя

Страница: 316 / 366

8 • 316
2004 • LaPalma
Electrical Systems
One of the most widely used tools used for testing a 12 Volt problem is
the test light. Test lights come in a host of varieties such as a light bulb with a
probe and ground clip to the more elaborate electronic ones that measure a
wide scale of voltages and perform a variety of functions. A VOM or Volt
Ohm Meter is used to perform a multitude of tests when exact values are
needed for evaluation. These meters come in an analog or digital format.
Either of these two testing tools may be used, depending upon personal
preference. If a 12 Volt light is not working the test light may be better suited
for this. In the case of a charging system problem the meter may be the tool
of choice. In any situation the testing tool is an invaluable piece of equipment
when it comes to determining an electrical problem.
Should it become necessary to use testing tools take certain precautions
and consider three things. First, recognize when the problem is beyond your
skill level. Nothing will create more mayhem than being armed with tools
and going in an unknown direction. Good intentions have led to major
problems. The second item to keep in mind is if something will cause more
grief by being dealt with now than if it were left alone and repaired by a
professional at a more convenient time. How many times have you said to
yourself, “This will only take a few minutes,” only to find it is taking an
entire day and you wished you had not touched it? The third item to consider
is whether or not the current situation may be potentially dangerous if left to
be repaired at a more convenient time?
NOTE: Check all related fuses before assuming you have
encountered an electrical problem or situation. Spare fuses should
be kept on hand, and can be purchased from most auto parts
stores. A fuse description label is on the distribution panel cover.
WARNING: If a fuse blows replace the fuse with the same
amperage rating and type. Installing higher amperage fuses can
damage the wiring or the item the fuse is protecting, or may cause
a fire. If the fuse repeatedly blows after replacing it do not continue
to replace it. Have the problem diagnosed and corrected by a
qualified technician.
Tools of the Trade
Knowing When to
Say No