Monaco DIPLOMAT 2004, Руководство пользователя

Страница: 204 / 446

DIPLOMAT 2004
5 • 204
EQUIPMENT
The main slide-out room operates by an electric switch which controls
an electric motor. Slide-out room operation uses many safety features
preventing mechanical damage or physical harm. The slide-out room(s) will
not operate until all safety requirements are met.
The design of the slide-out system requires very little maintenance. To
ensure long life of the slide-out system, follow these simple guidelines:
• Inspect the roof of the slide-out for debris such as pine needles,
dirt, leaves, sticks, etc. Any debris left on the top may cause
damage to the seals when being retracted. If debris is present wash
with soap and water, then rinse.
• When the room is out visually inspect the wipe seal. The seal
should be clean and free of dirt or other foreign material.
Inspect the seal for tears.
• In the event the slide-out room leaks, fully retract it. If
necessary, tape the exterior opening closed with duct tape until
repairs to the motorhome can be completed.
• Open a window or a vent to equalize pressure during slide-out
operation.
NOTE: Do not use any petroleum-based products on the slide-out
seal. Petroleum based products can damage the paint and will
cause premature aging of the rubber seal.
WARNING: Move the driver's seat forward before activating the
slide-out room. Damage to the upholstery can occur. The outside
area must be clear of any obstructions restricting slide-out room
operation. Ensure there is five or more feet of clear space outside
the slide-out room prior to extending or damage can occur. When
retracting the slide-out room, ensure there is sufficient clearance
inside the motorhome. Never move the motorhome with any slide-out
room extended.
CAUTION: Continuous operation of the slide-out room can drain
the batteries and damage the motor from overheating.
SLIDE OUT
OPERATION