Monaco DIPLOMAT 2004, Руководство пользователя

Страница: 203 / 446

5 • 203
EQUIPMENT
DIPLOMAT 2004
• With a 5/8” inch box wrench or socket, loosen the movable
strike bolt. Make all adjustments in small increments.
Tighten the bolt firmly after making adjustments. The bolts
should have slight up and down movement for vibration
control in travel.
• Test the operation of the dead bolt lock to ensure proper
functions.
• Apply silicone weekly to the entry door rubber gaskets to
prevent squeaking while the motorhome is traveling. Use a
one inch sponge paint brush, sprayed with silicone for easy
application.
CAUTION: When operating the entry door ensure the dead
bolt latch is fully in the unlock position prior to closing the
entry door. Failure to do so can result in damage to the dead
bolt and/or entry door.
Changing Screen Door Glass:
• The screen slider is Plexiglas, the slider can be bowed for
removal and replacement.
• Replace with new Plexiglas and reverse the procedure.
Adjusting the Screen Door:
• Loosen the chrome bolts on the hinge side of the screen
door; four on the top and four on the bottom.
• The steel hinge has slots to allow up and down movement.
• Four Allen type screws are on the top hinge, and four on
the bottom hinge, to adjust the screen door to properly fit to
the entry door. The hinge should fit tightly to the trim of
the door when the screen door is latched to the door and the
door is open.
Removable Screen:
• The top half of the screen door is removable. This allows
clear viewing through the entry door glass while traveling.
• To remove the top half of the screen door for travel, rotate
clips and remove the screen.
• To store the screen for travel, use the clips provided on the
bottom half of the screen door.
Screen Door
Maintenance