CS 150 Battery Crimping Tool
Doc No: ATS-638160200
Release Date: 12-06-07
UNCONTROLLED COPY
Page 15 of 21
Revision: A
Revision Date: 12-06-07
5.1 Periodic
Cleaning
Always clean tool after use and keep moving parts clear of dirt and debris.
This tool is basically maintenance free, only the bolt joints at the crimping head have to be oiled regularly.
Before use:
1. Inspect dies for wear or damage such as cracks, gouges, or chips.
2. Inspect the tool for damage or leaks. If damage is detected, return the tool to a Molex representative for
inspection.
After use:
1. Wipe all tool surfaces clean with a damp cloth and mild detergent. Excessive dirt and grit can contribute
to the premature wear of the tool’s internal mechanical parts. If this tool becomes dirty with excessive
debris it may jam and become damaged during operation.
3. Fully retract the ram. Place the tool in the carrying case. Store in a cool, dry place.
4. Charge the battery.
WARNING WARNING
Skin injection hazard:
Do not use hands to check for oil leaks.
High pressure oil easily punctures skin
causing serious injury, gangrene, or death.
If injured, seek medical help immediately
to remove oil.
Do not use solvents or flammable liquids to
clean the crimping tool.
Solvents or flammable liquids could ignite and
cause serious injury or property damage.
Monthly:
1. Thoroughly clean all surfaces.
A routine should be established to keep the tool as free from dirt as possible.
