CS 150 Battery Crimping Tool
Doc No: ATS-638160200
Release Date: 12-06-07
UNCONTROLLED COPY
Page 4 of 21
Revision: A
Revision Date: 12-06-07
WARNING WARNING
Do not use solvents or flammable liquids to clean
the crimping tool.
Solvents or flammable liquids could ignite and
cause serious injury or property damage.
An incomplete crimp can cause a fire.
Use proper die, connector, and cable combinations.
Improper combinations can result in an
incomplete crimp.
The relief valve will sound to indicate a completed
crimp. If you do not hear the sound of the relief valve,
the crimp is not complete.
Failure to observe these warnings could result in severe
injury or death.
WARNING WARNING
Do not dispose of the battery in a fire. It will vent fumes and may explode.
Failure to observe this warning could result in severe injury from harmful
fumes or burns from flying debris
Inspect tool and dies before use. Replace any worn or
damaged parts. A damaged or improperly assembled
tool can break and strike someone nearby.
Failure to observe this warning could result in severe
injury or death.
CAUTION CAUTION
Do not operate the tool without the dies. Damage to the ram or crimping
head can result.
Do not operate with the crimping head open. Damage to the ram or
seals can result.
This tool is not designed for continuous use. After 100 crimping cycles,
allow the crimping tool to cool down for 15 minutes.
Do not place the tool in a vise. The crimping tool is designed for hand-held
Operation only.
This tool may be used in damp or wet environments; however, we
recommend air-drying the tool before use if it becomes soaked.
Use this tool for the manufacturer’s intended purpose only.
Failure to observe these precautions may result in injury or property damage.
Do not allow anything to contact the battery’s terminals.
Do not immerse the battery in liquid. Liquid may
create a short circuit and damage the battery.
If the battery is immersed, contact your service
center for proper handling.
Do not place the battery into a pocket, tool pouch, or
tool box with conductive objects.
Conductive objects may create a short circuit and
damage the battery.
Do not place a battery on moist ground or grass.
Moisture may create a short circuit and damage the
battery.
Failure to observe these precautions may result in injury
or property damage.
CAUTION CAUTION
Do not store the battery at more than 60 °C (140 °F). Damage to the
battery can result.
Do not use another manufacturer’s charger. Other manufacturers’
chargers may overcharge and damage the battery.
Do not attempt to open the battery. It contains no user-serviceable parts.
Failure to observe these precautions may result in injury or property damage.
Do not perform any service or maintenance other than as
described in this manual.
Failure to observe this precaution may result in injury
and property damage.
For Service, Contact Your Local Molex Sales Office
Molex Application Tooling Group
2200 Wellington Court
Lisle, Illinois 60532
Tel: 630-969-4550
Fax: 630-505-0049
