Grizzly T28929, Инструкция по эксплуатации

Страница: 1 / 8

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T28929
2" PIPE/TUBE NOTCHER
INSTRUCTIONS
COPYRIGHT © MAY, 2020 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 11/18) #CS21020 PRINTED IN CHINA
Figure 1. T28929 2" Pipe/Tube Notcher.
Figure 2. Spindle release components.
V1.05.20
Specifications
Maximum Tube Diameter .................................2"
Chuck Dimension ............................................
1
⁄
2
"
Workpiece Degree Range ..........................0˚-45˚
Req. Clearance Between Chuck and Table ... 14"
Spindle Threads .......................................
1
⁄
2
",
5
⁄
8
"
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
3. Re-insert spindle, threaded end first (see
Figure 3).
4. Align hole in side of spindle with hole in
bracket and insert pin (see
Figure 3).
The notcher comes from the factory with the
spindle inverted. Before use, the spindle must be
removed and turned around.
Assembly
Introduction
The T28929 2" Pipe/Tube Notcher cuts notches in
pipe and tubing to make joints that fit together per-
fectly. This notcher features a durable steel frame,
is capable of 0-45˚ angle cuts, and works with any
standard drill press or slow-speed hand drill.
To install spindle for use:
1. Pull pin shown in Figure 2 to release spindle.
2. Remove
5
⁄
8
" adapter and washer from spindle
(see
Figure 2).
5
⁄
8
" Adapter
Adapter Washer
Pin
Figure 3. Inserting spindle for operations.
Pin Holes