Grizzly T28929 Скачать руководство пользователя страница 7

WARRANTY & RETURNS

Grizzly Industrial, Inc. warrants every product it sells for a period of 

1 year to the original purchaser from 

the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, 
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty 
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent 
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. 
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and 
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.

We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special, 
or consequential damages arising from the use of our products.

The manufacturers reserve the right to change specifications at any time because they constantly strive to 
achieve better quality equipment. We make every effort to ensure that our products meet high quality and 
durability standards and we hope you never need to use this warranty.

In the event you need to use this warranty, contact us by mail or phone and give us all the details. We will 
then issue you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of 
the carton. We will not accept any item back without this number. Proof of purchase must accompany the 
merchandise. 

Please feel free to write or call us if you have any questions about the machine or the manual. 

Thank you again for your business and continued support. We hope to serve you again soon.

To take advantage of this warranty, you must register it at https://www.grizzly.com/secureforms/

warranty-card, or you can scan the QR code below to be automatically directed to our warranty 
registration page. Enter all applicable information for the product.

WARRANTY

Содержание T28929









Отзывы: