molex Brad HarshIO 600, Руководство пользователя

Страница: 38 / 69

HarshIO 600
•
38
•
IP67 MDR for EtherNET/IP
Assembly #101
– Input Process & Error Status Data
Input Process Data (56 bytes)
Bit
Offset (in byte) 7 6 5 4 3 2 1 0
00 C7 C6 C5 C4 C3 C2 C1 C0
01 PS7 PS6 PS5 PS4 PS3 PS2 PS1 PS0
02 CS7 CS6 CS5 CS4 CS3 CS2 CS1 CS0
03 reserved OLUL OVUL UVUL reserved OLUB OVUB UVUB
04 reserved reserved reserved reserved OTP3 OTP2 OTP1 OTP0
05 reserved reserved reserved reserved MDR S3 MDR S2 MDR S1 MDR S0
06 MDR TD0
07 MDR TD1
08 MDR TD2
09 MDR TD3
10 MDR OS0
11 MDR OS1
12 MDR OS2
13 MDR OS3
Input data, information & Error status
Cx:
Channel (x = Channel number) as digital input - Pin2/Pin4
1: input activated
0: input disactivated
PSx: Port Status (x = Port number) - state of the pin1 (L+)
1: Overload / short detected
0: No error
CSx: Channel Status (x = Channel number)
– State of the Digital Output – Pin2/Pin4
1: short circuit detected
0: No error
UVx: Under Voltage (x = UL or UB)
1: Under voltage detected
0: No error
OVx: Over Voltage (x = UL or UB)
1: Over voltage detected
0: No error
OLx: Over Load (x = UL or UB)
1: Over load detected
0: No error
OTPx: Over Temperature (x = MDR port number)
This
error status indicates when one of the module’s port reaches the temperature >85°.
It is cleared when the port cools to the temperature <70°.
1: Over temperature detected
0: No error
Note!
If the temperature reaches 85° too frequently, the back label may be degraded due
to altered resin. But there is no negative impact. The module will keep operating
accurately
.