molex 63828-0200, Руководство пользователя

Страница: 1 / 7

Hand Crimp Tool for Micro-Fit 3.0 Crimp Terminals
Doc. No: ATS-638280200 Release Date: 03-15-16 UNCONTROLLED COPY Page 1 of 7
Revision: C Revision Date: 06-18-19
CONDUCTOR
BRUSH
STRIP LENGTH
CONDUCTOR
CRIMP
CUT-OFF
TAB
BELL
MOUTH
BEND UP
TWIST
ROLL
BEND
DOWN
SEAM
INSULATION
CRIMP
Application Tooling Specification
FEATURES

A full cycle ratcheting hand tool ensures complete crimps

Ergonomic soft grip handles for comfortable crimping

A precision user-friendly terminal locator with wire stop holds terminals in the proper crimping
position

Dies and locator from this tool can be used in the Battery Powered Tool Order No. 63816-0270
(110 V) or 63816-0280 (220 V) with the use of the 63816-0800 Crimp Head

Many different tool kits can be used with a single Battery Powered Crimp Tool

This tool is IPC/WHMA A-620 Class 2 compliant (see Scope table)

This tool is RoHS compliant; however, RoHS compliance is not required
SCOPE
Products: Micro-Fit 3.0 Crimp Terminals, 0.75mm 2 and 18 AWG (UL1061) wires.
Terminal
Series No.
Terminal
Order No.
Wire Size
►
Insulation Diameter
Strip Length
IPC/WHMA-A-620 (1) Terminal (2)
AWG mm² mm In. mm In. mm In.
43030 43030-0038
18 0.75
1.60-1.85 .063-.073 0.90-1.85 .035-.073 2.54-2.92 .100-.115
43031
● (3)
43031-0021
43031-0022
43031-0023
45807
45807-0003
18 —
45807-0005
203951 203951-0001 18 —
►
Insulation Diameter Notes
(1) Insulation OD range for optimum (IPC/WHMA-A-620 Class 2) insulation crimps
(2) Insulation OD range for the terminal product design
● Terminal Locator Note
(3) Separate terminal locator is needed for 43031 series (see page 2). If locator is missing it can be ordered (see page 7)
DEFINITION OF TERMS
Order Number
63828-0200
Type 4D