Molecular Devices SpectraMax GEMINI EM, Руководство оператора

Страница: 50 / 64

Chapter 4
4-6 SpectraMax GEMINI EM Operator’s Manual
Figure 4.3: The Fuse Box and Holder (with Fuses) Removed from Instrument
8) Insert new SLOWBLOW-rated fuses into the fuse holder. Either end of the
fuse may be forward.
9) Insert the fuse box into the opening in the instrument, making sure that
the fuses are on the left side (toward the power receptacle). Press the fuse
box into place, making sure the cover snaps closed.
10) Reconnect the power cord to the instrument and to the wall outlet and
reconnect other cables previously disconnected.
Installing the
Drawer
Adapter
If you are reading standard 96-well or 384-well microplates from the top, you
will need to install the drawer adapter.
Incorrect insertion or removal of the adapter may cause
damage to the microplate drawer of the SpectraMax GEMINI EM. The
corner cut-out must be in the lower left corner where the plate pusher
is located.
1) Turn power to the instrument on.
2) Press the
[Drawer]
button on the front panel or activate the drawer open
command in SoftMax Pro software.
3) Hold the adapter so that the label is on the front side facing up.
4) Place the top back (Row A) portion of the adapter into the drawer
fi rst.
The corner cut-out must be in the lower left corner where the plate pusher
is located. While pushing against the back edge of the adapter, lower the
front of the adapter into the drawer (see Figure 4.4).
Figure 4.4: Adapter Inserted in Microplate Drawer
!
CAUTION: