Molecular Devices SpectraMax GEMINI EM, Руководство оператора

Страница: 47 / 64

Maintenance
SpectraMax GEMINI EM Operator’s Manual 4-3
Technical
Support
Molecular Devices Corporation is a leading worldwide manufacturer and dis-
tributor of analytical instrumentation. We are committed to the quality of our
products and to fully supporting our customers with the highest possible
level of technical service. In order to fully bene
fi t from our technical services,
please complete the registration card and return it to the address printed on
the card.
If you have any problems using the SpectraMax GEMINI EM Dual-Scanning
Microplate Spectrophotometer, in the U.S., contact our Technical Services
group at 1-800-635-5577; elsewhere contact your local representative.
All maintenance procedures described in this manual can be
safely performed by quali fi ed personnel. Maintenance not covered in
this manual should be performed only by a Molecular Devices repre-
sentative.
Turn the power switch off and disconnect the power cord
from the main power source before performing any maintenance pro-
cedure that requires removal of any panel or cover or disassembly of
any interior instrument component.
Removal of protective covers that are marked with the High
Voltage warning symbol shown below can result in a safety hazard.
Cleaning
Wear gloves during any cleaning procedure that could
involve contact with either hazardous or biohazardous materials or
fl uids.
Periodically, you should clean the outside surfaces of the SpectraMax GEMINI
EM using a cloth or sponge that has been dampened with water. Do not use
abrasive cleaners. If required, clean the surfaces using a mild soap solution
diluted with water or a glass cleaner and then wipe with a damp cloth or
sponge to remove any residue. Do not spray cleaner directly onto the instru-
ment.
If needed, clean the microplate drawer using a cloth or sponge that has been
dampened with water.
Should fl uids spill in the drawer area (when the drawer is out), they will be
directed to a tray at the bottom of the instrument, from which they will exit to
the bench or counter beneath the instrument. Wipe up any spills immediately.
Clean only the exterior of the unit (and the microplate drawer if necessary).
Never clean the inside of the instrument. Do not allow excess water or other
fl uids to drip inside the instrument.
WARNING:
WARNING:
WARNING:
BIOHAZARD: