Molecular Devices SpectraMax GEMINI EM, Руководство оператора

Страница: 31 / 64

Installation
SpectraMax GEMINI EM Operator’s Manual 2-3
Installation
Warnings
1) Always make sure the power switch on the instrument is in the OFF posi-
tion and remove the power cord from the back of the instrument prior to
any installation or relocation of the instrument.
2) Do not operate the instrument in an environment where potentially dam-
aging liquids or gases are present.
Installation
Cautions
Do not touch or loosen any screws or parts other than those speci fi cally desig-
nated in the instructions. Doing so might cause misalignment and will void the
instrument warranty.
Unpacking
The SpectraMax GEMINI EM is packed in a specially designed carton. Please
retain the carton and the packing materials. If the unit should need to be
returned for repair, you must use the original packing materials and carton
for shipping. If the carton has been damaged in transit, it is particularly
important that you
retain it for inspection by the carrier in case there has also been
damage to the instrument.
The SpectraMax GEMINI EM weighs approximately 35
pounds (16 kg) and should be lifted with care. It is recommended that
two persons lift the instrument together, taking the proper precau-
tions to avoid injury.
After examining the carton, place it on a fl at surface in the upright position.
Open the top of the box and lift the SpectraMax GEMINI EM, along with the
packing materials around the ends, up and out of the shipping box. Remove
the packing material from both ends of the instrument and set the instrument
down carefully. The packing list that accompanies the instrument describes all
components that should have been placed in the packing carton. Make sure
all these items are present before proceeding.
Setting Up the
Instrument
1) Place the SpectraMax GEMINI EM on a level surface, away from direct sun-
light, dust, drafts, vibration, and moisture.
2) Turn the instrument around so that the back of the instrument is facing
you as shown in Figure 2.1.
Figure 2.1: View of Rear Panel
WARNING:
RS-232
Parallel Port (not currently active)
Power Switch
Fuse Box Cover
Power Cord
Receptacle
Label
Serial Port